vehicle gauges

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
yycwrangler
New User
Posts: 9
Joined: Fri May 17, 2019 3:41 pm

vehicle gauges

Post by yycwrangler » Mon May 20, 2019 7:11 am

Successful install of all wires to my pioneer dmh c2500nex from my rr using the datalink harness. I have also connected the obII plug and according to my pioneer I should be able to view my gauges.

However when I go to the menu on the pioneer, it does not show the option to view gauges..

thoughts?

cheers
Al

User avatar
Dara DeGrand
ADS Team
Posts: 6130
Joined: Mon Dec 02, 2013 1:34 pm

Re: vehicle gauges

Post by Dara DeGrand » Mon May 20, 2019 8:47 am

That radio does not have an iDatalink port, so it does not support the gauges feature. If you want gauges, you must use one of the radios on this list:

https://maestro.idatalink.com/compatible-radios
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”