2009 Wrangler with infinity amp with Pioneer MVH-2300NEX

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
terpsmandan
New User
Posts: 2
Joined: Fri May 03, 2019 11:40 am

2009 Wrangler with infinity amp with Pioneer MVH-2300NEX

Post by terpsmandan » Fri May 03, 2019 11:52 am

it is installed and sounds fine. The reverse lead is not connected to the Pioneer harness. I have two issues:

This unit is supposed to allow fading front to rear. I know that the fade signal is sent via the can-bus and not directly from the radio. Is there something I am doing wrong?

The car features and car sources buttons are grayed out and not available. How can I access those?

User avatar
Dara DeGrand
ADS Team
Posts: 5948
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2009 Wrangler with infinity amp with Pioneer MVH-2300NEX

Post by Dara DeGrand » Fri May 03, 2019 12:34 pm

Is the light on the maestro flashing, possibly 2x red?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

terpsmandan
New User
Posts: 2
Joined: Fri May 03, 2019 11:40 am

Re: 2009 Wrangler with infinity amp with Pioneer MVH-2300NEX

Post by terpsmandan » Mon May 13, 2019 7:12 pm

I forgot to connect the data cable....

User avatar
Zack Flynn
ADS Team
Posts: 591
Joined: Mon Dec 12, 2011 9:46 am

Re: 2009 Wrangler with infinity amp with Pioneer MVH-2300NEX

Post by Zack Flynn » Mon May 13, 2019 7:26 pm

So all is good now then presumably?
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “Dodge, Chrysler, Jeep”