2017 Tacoma / Kenwood DNX695s

Post Reply
appleslice
New User
Posts: 2
Joined: Mon Jan 14, 2019 12:37 pm

2017 Tacoma / Kenwood DNX695s

Post by appleslice » Mon Jan 14, 2019 1:12 pm

I have installed the DNX695s in my Tacoma, and the following is not working:

Steering wheel music channel controls
Missing GPS dash menu tab
Missing music dash menu tab

I have reset the module and vehicle settings.

User avatar
Dara DeGrand
ADS Team
Posts: 5814
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2017 Tacoma / Kenwood DNX695s

Post by Dara DeGrand » Tue Jan 15, 2019 3:25 pm

What version is your radio firmware? Please make sure it is up to date.

Just to be sure, all of your other radio related steering wheel controls are working? It appears that you have them programmed to work when you hit the left and right arrow buttons. When you hit those buttons, does the light on the RR blink like it sees you hitting a button?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

appleslice
New User
Posts: 2
Joined: Mon Jan 14, 2019 12:37 pm

Re: 2017 Tacoma / Kenwood DNX695s

Post by appleslice » Wed Jan 16, 2019 8:43 am

Thanks for responding.

I did a firmware check when I got the unit, but will check again.

I will have to pull the radio to answer your other question since the maestro in behind it, but I did have the other dash menus (info, truck, settings, and warnings) and could cycle through those and their content.

I will let you know that after about five key starts, I seem to have everything, the steering wheel controls are not working as programmed, but I will pull the stereo and post what I get for lights. Thanks again.

Post Reply

Return to “TO2 radio replacement solution”