2018 Toyota Tundra OBDII concerns

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
mshannon1977
New User
Posts: 3
Joined: Sun Jan 13, 2019 10:26 am

2018 Toyota Tundra OBDII concerns

Post by mshannon1977 » Sun Jan 13, 2019 10:50 am

I recently purchased a Maestro RR, TO2 Harness, and a Pioneer AVIC W8400 NEX radio. I am going to do the install next weekend, everything looks pretty straight foreard with one question, the grey/red wire to the OBD2 port. I understand that this connection provides vehicle specific information to be displayed on the radio such as check engine, tire pressure, open door etc...however I have read others having issues with it providing constant power and draining the truck battery, mainly for Kenwood radios. Should I be concerned with this issue for my setup with a pioneer? Should I leave the OBD2 grey/red wire harness unplugged? Thank you.

User avatar
billr
ADS Team
Posts: 178
Joined: Mon Feb 05, 2018 9:18 am

Re: 2018 Toyota Tundra OBDII concerns

Post by billr » Mon Jan 14, 2019 8:38 am

The Grey/Red wire going down to the OBD2 will provide the information for the TPMS (tire pressure). I feel confident in recommending that you connect the OBD2 connector so you can utilize all the features of the Maestro RR. Of course if at any time you fell unsure about it you can disconnect the OBD2 connector and that will not affect the operation of the radio.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

mshannon1977
New User
Posts: 3
Joined: Sun Jan 13, 2019 10:26 am

Re: 2018 Toyota Tundra OBDII concerns

Post by mshannon1977 » Mon Jan 14, 2019 9:45 am

Thank you for the response. Is the TPMS the only info provided when plugging in the grey/red harness into the OBD2 port?

Post Reply

Return to “Toyota”