2011 RAM1500 To Uconnect or Not?

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
BustaG
New User
Posts: 1
Joined: Wed Jan 09, 2019 11:12 pm

2011 RAM1500 To Uconnect or Not?

Post by BustaG » Wed Jan 09, 2019 11:28 pm

I'm putting in a Kenwood DMX905S, Maestro Rr, CH1 & AVCH1 harnesses. I noticed in the F/W flashing instructions that I could choose to use Uconnect or go with the 905S for phone pairing etc. I've never been a big fan of the 2011 version of Uconnect in the truck so I chose to use the Kenwood BT solution. Is there anything I'm overlooking, like lost features, by not going with Uconnect?

Thanks

User avatar
billr
ADS Team
Posts: 382
Joined: Mon Feb 05, 2018 9:18 am

Re: 2011 RAM1500 To Uconnect or Not?

Post by billr » Thu Jan 10, 2019 8:46 am

if anything I think you gain...by having a better BT experience. The only thing that I know bugs people when they don't use the Uconnect is the fact you have to install the mic that comes with the radio and not use the factory installed mic. To some people that is a make or break feature.
The radio you have is really nice and I would want to use it to its fullest capability.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

Post Reply

Return to “Dodge, Chrysler, Jeep”