JVC KW-840BT in 2011 Traverse

Group using the GM3 and GM5 firmware for Onstar bluetooth, sat radio, Door chime, turn signal retention and steering wheel control, custom gauges, vehicle info, park assist... * see specific firmware for full feature list.
Post Reply
sherm1082
New User
Posts: 1
Joined: Sat Jan 05, 2019 9:30 pm

JVC KW-840BT in 2011 Traverse

Post by sherm1082 » Sat Jan 05, 2019 9:40 pm

I installed the JVC radio in my wife's Traverse. No problems with install besides the fact there is a connection for the rearview camera but there isn't a signal for the camera in the radio area. Anyway, the question I have is about the programmable buttons for the steering wheel. You used to be able to press one of the buttons to cycle through the radio presets but that option isn't available. Is that a feature that can be added?

User avatar
Dara DeGrand
ADS Team
Posts: 5814
Joined: Mon Dec 02, 2013 1:34 pm

Re: JVC KW-840BT in 2011 Traverse

Post by Dara DeGrand » Mon Jan 07, 2019 3:49 pm

This is a settings thing; On the JVC radio, you just need to change the seek type in the radio and that will allow it to cycle through presets instead of stations when you hit seek.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Chevrolet, GMC, Buick, Cadillac, Pontiac, Saturn, Hummer”