2018 Jeep JKU iLX-207 OBD2

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
Capthwdy666
New User
Posts: 2
Joined: Sat Jan 05, 2019 11:14 am

2018 Jeep JKU iLX-207 OBD2

Post by Capthwdy666 » Sat Jan 05, 2019 11:17 am

Hi, each time I try to check my guages I get OBD2 disconnected errie. Not sure if this is from Radio or maestro

User avatar
Dara DeGrand
ADS Team
Posts: 5347
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2018 Jeep JKU iLX-207 OBD2

Post by Dara DeGrand » Mon Jan 07, 2019 10:22 am

Just making sure- Is it saying 'can error' or 'obd2 disconnected' ?


OBD2 disconnected means that the Rr is not seeing signal from the OBD2. This is likely a connection issue at the OBD2 or where the OBD2 plugs into the t-harness (the black 2-pin connector)
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”