I'm having an issue with hooking up my SU2 Harness. I got everything together I think but I have no sound. I believe this is because I need to cut that brown/red wire and splice it with the blue/white one to turn on the OEM amplifier. However, looking at the 28 pin connector, counting over it looks like it is not pin 9 as in the diagram. It appears to be pin 11. below represents the connector and the "o" is where my brown/red wire is. by my count, that's not 9. Please help!
x x x x x o x x x x x x x x
x x x x x x x x x x x x x x
Group using the SU1 and SU2 firmware for Ford SYNC retention * see specific firmware for full feature list.
2 posts • Page 1 of 1
- Dara DeGrand
- ADS Team
- Posts: 5346
- Joined: Mon Dec 02, 2013 1:34 pm
We have verified that the amp turn-on in the car is pinned where our brown/red wire is. The pin position may vary based on which direction the plug is facing and which direction you're counting. Don't think too hard about it; Hook it up and you will have sound.
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC