Toyota Tacoma 2018 with Kenwood ddx8905s

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
New User
Posts: 1
Joined: Thu Dec 27, 2018 7:39 pm

Toyota Tacoma 2018 with Kenwood ddx8905s

Post by thepoolboy » Thu Dec 27, 2018 7:51 pm

Ater flashing the Maestro unit for the non jbl system with the stock entries the up and down buttons on the audio controls on the steering wheel do not move to the next song, etc. I noticed on the flash it states: "next widget" for the up and "none" for the down. Should these not be programmed seek+ and seek -? If not, what do they need to be to operate?

Also, every time I try to log in the idatalink website states "Log in error" and I have to re-set my password. Any advice? Thanks!

User avatar
Dara DeGrand
ADS Team
Posts: 5816
Joined: Mon Dec 02, 2013 1:34 pm

Re: Toyota Tacoma 2018 with Kenwood ddx8905s

Post by Dara DeGrand » Fri Dec 28, 2018 11:29 am

I have reset your password once more; this seems to fix it for those that I have encountered with the same issue. I will email you with your new password.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Toyota”