Guages and Vehicle info grayed out 2009 T&C w/Kenwood DNX575s

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
TotalImageBG
New User
Posts: 1
Joined: Thu Dec 27, 2018 4:20 pm

Guages and Vehicle info grayed out 2009 T&C w/Kenwood DNX575s

Post by TotalImageBG » Thu Dec 27, 2018 4:34 pm

I have a 2009 Town&Country with a Kenwood DNX-575s. I can get in vehicle and start it and drive and my guages and vehicle info will be available. I turn key off open door and then close door and proceed to start van and my guages and vehicle info will be grayed out. I can then turn key off and re-open door and wait a min or two then restart and they will be accessable again about 90% of time. I can re-ini the head unit and it will bring them back every time.

Rr
CHI
SAT1
AVCH1

Any info on this issue would be greatly appreciated.

thanks

User avatar
Dara DeGrand
ADS Team
Posts: 6096
Joined: Mon Dec 02, 2013 1:34 pm

Re: Guages and Vehicle info grayed out 2009 T&C w/Kenwood DNX575s

Post by Dara DeGrand » Fri Dec 28, 2018 1:47 pm

Update your radio firmware; it is a bug that Kenwood resolved a few months ago, so when you update, it should be fixed.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”