2009 Ford Taurus SWI wire Location?

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
drillsar
New User
Posts: 6
Joined: Thu Dec 27, 2018 10:51 am

2009 Ford Taurus SWI wire Location?

Post by drillsar » Thu Dec 27, 2018 10:53 am

I am not sure which wire to cut. ANyone have pics to share? I think cut wrong one

User avatar
Zack Flynn
ADS Team
Posts: 375
Joined: Mon Dec 12, 2011 9:46 am

Re: 2009 Ford Taurus SWI wire Location?

Post by Zack Flynn » Thu Dec 27, 2018 1:07 pm

Sorry. We don't have any pictures of that connection. Someone else might be able to post some.
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

drillsar
New User
Posts: 6
Joined: Thu Dec 27, 2018 10:51 am

Re: 2009 Ford Taurus SWI wire Location?

Post by drillsar » Thu Dec 27, 2018 2:43 pm

Do you connect it to the module wire? I cut the wrong one I think.. I cut the green connector one. I think it's on the left side of console that is where the Sync connector is in console not the right side per instructions.

drillsar
New User
Posts: 6
Joined: Thu Dec 27, 2018 10:51 am

Re: 2009 Ford Taurus SWI wire Location?

Post by drillsar » Thu Dec 27, 2018 2:57 pm

Yes it's at the driver side inside console the wire going to module. It works now

drillsar
New User
Posts: 6
Joined: Thu Dec 27, 2018 10:51 am

Re: 2009 Ford Taurus SWI wire Location?

Post by drillsar » Mon Dec 31, 2018 10:34 pm

Actually it doesn't work and trying to figure out why.. Every other button works but Sync. Isn't it supposed to say a voice like say a command..

JustinFerroni
ADS Team
Posts: 297
Joined: Mon Jan 15, 2018 2:18 pm

Re: 2009 Ford Taurus SWI wire Location?

Post by JustinFerroni » Wed Jan 02, 2019 9:12 am

The best advice i can give you is to go directly to the source if we are unsure of the wire we are tagging. COnnect the wire you cut and grab the SYNC wire at the steering columns clock spring. Get your multimeter and test the wires first to identify the correct one and simple make the connection the steering wheel side of the cut wire.
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”