2008 Jeep WK

Post Reply
grinmaul
New User
Posts: 2
Joined: Fri Dec 07, 2018 4:28 pm

2008 Jeep WK

Post by grinmaul » Fri Dec 07, 2018 4:34 pm

I am installing an RR with CH1 into my jeep, i am seeing conflicting advice on what to do if i have a factory amp. on the installation videos it is saying to hook up white to green if i do have a factory amp, and green to green without, but the manual that comes with the CH1 says the opposite.

so my question, i have the factory Boston acoustic amp and speakers. what do i do with the green and white connectors...

User avatar
Dara DeGrand
ADS Team
Posts: 5203
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2008 Jeep WK

Post by Dara DeGrand » Fri Dec 07, 2018 4:58 pm

With a factory amplifier, you would have the connectors green to green, and white to white.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

grinmaul
New User
Posts: 2
Joined: Fri Dec 07, 2018 4:28 pm

Re: 2008 Jeep WK

Post by grinmaul » Fri Dec 07, 2018 5:24 pm

Thank you for the prompt response!

Post Reply

Return to “CH1 radio replacement solution”