Kenwood DNX575s

Analog Steering Wheel Interface
Post Reply
New User
Posts: 1
Joined: Thu Dec 06, 2018 12:38 am

Kenwood DNX575s

Post by armor99 » Thu Dec 06, 2018 12:44 am

I have a Kenwood DNX575s. I have installed it, flashed the Maestro SW, and all works great. However I would like to make the following change. When I press and hold one of the steering wheel buttons, I would like the Kenwood to display the onboard Garmin GPS. The same as if I pressed the GPS button on the head unit. However, on your website, going through the flash process, there does not seem to be an option on the picklist to do that. Is there a way to achieve this? Or if the function is not on the pick list, it cannot be added to a button? Thanks....


ADS Team
Posts: 333
Joined: Mon Jan 15, 2018 2:18 pm

Re: Kenwood DNX575s

Post by JustinFerroni » Thu Dec 06, 2018 8:40 am

the only way to achieve this would be by using the Maestro RR and the TO1 harness.
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

Post Reply

Return to “Maestro SW”