2017 BRZ

Group using the SU1 and SU2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
mrheaume
New User
Posts: 3
Joined: Thu Nov 29, 2018 1:41 am

2017 BRZ

Post by mrheaume » Thu Nov 29, 2018 2:18 am

I was looking at the install guides for the SU2 harness and do not see any install guide for a 2017 model year.
Do I use the older model yaer, the fr-s or 86?

User avatar
Dara DeGrand
ADS Team
Posts: 5204
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2017 BRZ

Post by Dara DeGrand » Thu Nov 29, 2018 8:41 am

http://images.idatalink.com/corporate/C ... 181119.pdf

This guide will work; the 2013-2016 install will be the same for the 2017.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

mrheaume
New User
Posts: 3
Joined: Thu Nov 29, 2018 1:41 am

Re: 2017 BRZ

Post by mrheaume » Thu Nov 29, 2018 11:14 am

Awesome thanks!

mrheaume
New User
Posts: 3
Joined: Thu Nov 29, 2018 1:41 am

Re: 2017 BRZ

Post by mrheaume » Sat Dec 01, 2018 3:52 pm

Hello, I went to install my Kenwood DDX9904s with the RR and the OEM amplifier is not turning on. My battery is also being drained.

Any ideas.

User avatar
Dara DeGrand
ADS Team
Posts: 5204
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2017 BRZ

Post by Dara DeGrand » Mon Dec 03, 2018 9:33 am

What harness and firmware do you have? You should be using the SU2 harness and firmware. With this solution, you should not have any current draw issues.

As for the amplifier, make sure the blue and blue/white wires in the SU2 harness are hooked to amp turn-on from the radio. Also, you must cut pin 9 in the harness (brown/red) and hook that to the amp turn-on wire. See the install guide below; it explains it a little more thoroughly.

http://images.idatalink.com/corporate/C ... 181119.pdf
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Subaru”