Honda Civic Si 2015 Mic and Imid Questions

[Dara DeGrand]

Let's give this a shot: We updated the firmware. Now you should see a firmware in there called "ADS-RR(SR)-HO2-DS Set Time V2 (512) 1.2"

He updated the coding for the clock, and the gauges, to address the issue you mentioned a few posts up.

[nicholai_l]

Current I only see ADS-RR(SR)-H02-DS Set time V2 (512) (v.0.1) as my options in user firmware, which does not work. Possibly the file was not uploaded?

[Dara DeGrand]

It's the same firmware name; the engineer said he replaced the old beta under the same name. Please re-flash with it.

UPDATE: I see you re-flashed the most up-to-date beta firmware. Is it the same functionality? Do the gauges work any differently?

[nicholai_l]

Tried again with the new firmware, and the clock didn’t update even when I changed the radio time. It’s stubborn, and I’m gonna flash yet again and see if anything changes


EDIT: I tried, the gauges work perfectly now! Despite being blue (Si is red,so it looks out of place). Clock still not allowing me to change it.

[Dara DeGrand]

If you go to: OEM setup -> Maestro Settings -> Maestro Module -> About Maestro -> OEM Systems -> MID , What does that screen say?

[nicholai_l]

It says:
System Detected
GA NET
(One in each line)

[Dara DeGrand]

Thanks for the update. We found something weird with how the Alpine sends time, and have updated the firmware. I really think we've got it this time!

Your new beta: "ADS-RR-HO2-DS Set Time V3 (512)"

[nicholai_l]

It worked! It took a little time to update the time but they’re synced now for good!!! Yes! Thanks so much. One last thing, can the color of the gauges on the gauge screen be changed, or are they stuck on blue through firmware?

[Dara DeGrand]

The aesthetic look of the gauges are decided by the radio manufacturer, so they are always going to be blue. There isn't a way to change them. Otherwise, that is awesome news! Thanks for your patience and help in trying the test firmwares.

[nicholai_l]

Awww darn, well I guess I’ll deal with the blue . Thank you so much for helping me resolve the issue, the clocks are slightly out of sync now (iMid is 10s behind), but it works well otherwise. I did notice on the gauges the 0-60 and quarter mile times sometimes don’t activate: how is this supposed to be reset and then triggered? Again, thank you so much for your help.

[Dara DeGrand]

You pulse your foot brake a few times and hold, and the gauges will display "READY".