2008 JKU

Post Reply
Slow_Poke
New User
Posts: 2
Joined: Thu Nov 15, 2018 8:44 am

2008 JKU

Post by Slow_Poke » Thu Nov 15, 2018 9:54 am

First off I would like to say this process is straight forward and easy with the provided instructions, but..... I am unable to flash the RR Module for my Soundstream VRN-65HB? There isn't any Soundstream products in the drop down menu? At this point I am not sure what to do, is there another way to flash?

Thank you, Slow-Poke

User avatar
Zack Flynn
ADS Team
Posts: 572
Joined: Mon Dec 12, 2011 9:46 am

Re: 2008 JKU

Post by Zack Flynn » Thu Nov 15, 2018 1:13 pm

Some of the Soundstream radios follow the kenwood with Bluetooth steering wheel protocol. If you contact Soundstream technical support they should be able to tell you if that is the case for your specific model, or what protocol it uses if not. Then choose that for your radio when flashing the unit on our site. Hope that helps.
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Slow_Poke
New User
Posts: 2
Joined: Thu Nov 15, 2018 8:44 am

Re: 2008 JKU

Post by Slow_Poke » Thu Nov 15, 2018 2:53 pm

That sounds like a plan, I will call Soundstream tech support and post a follow up.

Post Reply

Return to “CH1 radio replacement solution”