Ready mode for MT?

Available in Canada and USA
Post Reply
Autoaccessoryworld
12Volt Specialist
Posts: 6
Joined: Wed Mar 02, 2016 10:32 pm

Ready mode for MT?

Post by Autoaccessoryworld » Sat Oct 27, 2018 1:22 am

Going to be doing install (HC1) on 2017 Honda Civic MT , was wondering if there is a ready mode like other starters that the car must be put in first before remote start
Robert Verhoeven
Auto Accessory World
(905) 725-7170
40 russet ave unit 2
Oshawa, ont.
l1g 3r5

User avatar
Murph
Site Admin
Posts: 7286
Joined: Sun Oct 23, 2011 8:35 pm

Re: Ready mode for MT?

Post by Murph » Sat Oct 27, 2018 2:37 pm

HC1 does not cover manual transmission at this time. It's a feature that is coming but at this time, it's not supported.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

Autoaccessoryworld
12Volt Specialist
Posts: 6
Joined: Wed Mar 02, 2016 10:32 pm

Re: Ready mode for MT?

Post by Autoaccessoryworld » Sat Oct 27, 2018 10:51 pm

Ok was only wondering cause it shows wire diagram for separate AT and MT , with MT diagram showing (-) starter output to clutch
Robert Verhoeven
Auto Accessory World
(905) 725-7170
40 russet ave unit 2
Oshawa, ont.
l1g 3r5

User avatar
Murph
Site Admin
Posts: 7286
Joined: Sun Oct 23, 2011 8:35 pm

Re: Ready mode for MT?

Post by Murph » Sun Oct 28, 2018 12:34 am

The guides are being updated for future coverage. When you try to flash a module today, you will see the only choice is AT.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

Post Reply

Return to “iDatastart HC1”