2011 Yukon Denali AVIC-6200NEX RR No reverse camera

Group using the GM3 and GM5 firmware for Onstar bluetooth, sat radio, Door chime, turn signal retention and steering wheel control, custom gauges, vehicle info, park assist... * see specific firmware for full feature list.
Post Reply
mdbetts
12Volt Specialist
Posts: 6
Joined: Thu Jan 26, 2012 6:26 pm

2011 Yukon Denali AVIC-6200NEX RR No reverse camera

Post by mdbetts » Wed Oct 24, 2018 11:04 am

When I put the vehicle in reverse the camera doesnt display just the screen with the back up sensors. they do show the distance and beep fine however the OEM camera will not display. Let me know what I can do and yes before you ask Dara, it is plugged in LOL.
Technical Support
Omega R & D
MECP Advanced Certified Installer

User avatar
Dara DeGrand
ADS Team
Posts: 5135
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2011 Yukon Denali AVIC-6200NEX RR No reverse camera

Post by Dara DeGrand » Wed Oct 24, 2018 11:50 am

Mike,
With this radio, you can only get one thing to display at a time; either the backup camera, or the parking assist. I would recommend going into the OEM setup of the radio and turning the parking assist interrupt OFF. With it set like that, you will get parking assist beeps, but the camera should display.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Chevrolet, GMC, Buick, Cadillac, Pontiac, Saturn, Hummer”