07 Honda Element Pioneer AVH-1400NEX Issue

Analog Steering Wheel Interface
Post Reply
lou4gehrig
New User
Posts: 1
Joined: Thu Oct 11, 2018 5:09 am

07 Honda Element Pioneer AVH-1400NEX Issue

Post by lou4gehrig » Thu Oct 11, 2018 5:25 am

I'm trying to troubleshoot the ADS-MSW with an 07 Honda Element with a Pioneer AVH-1400NEX. I've wired it as the instructions mentioned (red to radio/harness red, black to radio/harness black, purple/red to factory A3, black/white to factory A14). I flashed the unit on the Maestro SW site with the setup I wanted. So when turning the key, the unit flashes once to indicate being programmed. However, the behavior is off. The volume - works, the volume + does not. The Chan button does not work. The Mode button changes the source, however this doesn't match what I had coded onto the unit. Any advice would be appreciated.

User avatar
billr
ADS Team
Posts: 116
Joined: Mon Feb 05, 2018 9:18 am

Re: 07 Honda Element Pioneer AVH-1400NEX Issue

Post by billr » Thu Oct 11, 2018 8:48 am

when pressing the Vol Up button or the Channel Up button, does the SW blink at you?
As for the Mode button, I see that you have it set as the Source button when you just tap that button and the Voice or Siri prompt if you push and hold the Mode button down.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

Post Reply

Return to “Maestro SW”