2016 Ford f-250 with sync and Pioneer avh 501-ex w/maestro

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
eickdle
New User
Posts: 1
Joined: Wed Oct 10, 2018 12:53 am

2016 Ford f-250 with sync and Pioneer avh 501-ex w/maestro

Post by eickdle » Wed Oct 10, 2018 1:30 am

Hi- Recently installed the pioneer radio with maestro. Everything worked ok for about 2 months but recently ran into an issue with sync that when the steering wheel button was pressed to access sync no voice response occurred. Reset the radio and it again worked but only a few times. Again reset with the same issues. Any ideas?

User avatar
Zack Flynn
ADS Team
Posts: 348
Joined: Mon Dec 12, 2011 9:46 am

Re: 2016 Ford f-250 with sync and Pioneer avh 501-ex w/maestro

Post by Zack Flynn » Wed Oct 10, 2018 5:59 pm

It is most likely the sync system itself that needs to be reset when this happens. You can disconnect the vehicle battery(batteries) for a few minutes or unplug the main 54 pin connector on the sync module under the passenger side of the dash for a few minutes and that should do it. If symptoms continue after that give us a call and we can go thru some other things with you.
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”