2015 Tacoma W/JBL 12v Accessory.

Post Reply
mchwtecheng
New User
Posts: 5
Joined: Thu Sep 13, 2018 1:45 pm

2015 Tacoma W/JBL 12v Accessory.

Post by mchwtecheng » Fri Oct 05, 2018 2:31 pm

Hi.

I was wondering where the T01 harness gets the 12v Accessory power from? (I.e red wire)

Does the RR module generate 12v ACC power for the radio or is the T01 pulling 12v ACC from the vehicle? I know some modules generate 12v ACC if it sees data on a data-bus as opposed to being a 0v/12v level trigger.

The reason I ask is because I'm having an issue that seems like an intermittent glitch on the 12v ACC wire. I want to know if I should start by looking at the RR module or the vehicle wiring itself.

User avatar
Dara DeGrand
ADS Team
Posts: 5009
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2015 Tacoma W/JBL 12v Accessory.

Post by Dara DeGrand » Fri Oct 05, 2018 2:59 pm

It's doing a mixture of both. We use the truck's accessory power (red/black in our harness) to activate our on-board relay, which then sends 12v out on the heavy gauge red wire of the RR.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

mchwtecheng
New User
Posts: 5
Joined: Thu Sep 13, 2018 1:45 pm

Re: 2015 Tacoma W/JBL 12v Accessory.

Post by mchwtecheng » Mon Oct 08, 2018 1:24 pm

I finished installing the module and everything appears to be working fine except "Accessory during crank". In my option menu this feature is disabled and cannot be configured. It's a greyed out feature, how can I enable?

The T01 Harness has Aux RCA cables and a cable labeled "Audio Cable". The Pioneer uses the 3.5mm jack for Aux input? Do I use the "Audio Cable" for factory Aux integration or the RCA cables with a 3.5mm adapter?

User avatar
Zack Flynn
ADS Team
Posts: 275
Joined: Mon Dec 12, 2011 9:46 am

Re: 2015 Tacoma W/JBL 12v Accessory.

Post by Zack Flynn » Mon Oct 08, 2018 6:43 pm

We spoke this morning when you called. Hope the accessory during crank issue was cleared up.
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “TO1 radio replacement solution”