Kenwood 6705S with rear camera backup guidelines

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
AmazinglySmooth
New User
Posts: 19
Joined: Wed Sep 05, 2018 3:15 pm

Kenwood 6705S with rear camera backup guidelines

Post by AmazinglySmooth » Wed Oct 03, 2018 9:23 pm

I don't know if you can help me, but as part of the install I connected the ODB connector to my Maestro and to the Kenwood yielding backup camera guidelines. I can't find any resources on how to calibrate the backup lines so that, when turning, the arc lines match the real trajectory of the vehicle. I can easily setup the left and right lines, but I don't know what depth the horizontal lines should represent. Are these standard depths?

User avatar
Dara DeGrand
ADS Team
Posts: 5215
Joined: Mon Dec 02, 2013 1:34 pm

Re: Kenwood 6705S with rear camera backup guidelines

Post by Dara DeGrand » Thu Oct 04, 2018 8:41 am

There is no way to calibrate the active guidelines. We simply read the steering angle from the steering angle sensor (which comes from a module at the steering wheel). If the lines are skewed, it could be because the vehicle had the steering wheel removed during service and it wasn't put on exactly right when it was reassembled.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Toyota”