2011 GMC Sierra will not remote start

Fiat doorlock integration and KLON immobilizer bypass solution for select std.key models 2011 and up.
Post Reply
kguent01
New User
Posts: 1
Joined: Sat Sep 22, 2018 9:49 pm

2011 GMC Sierra will not remote start

Post by kguent01 » Sat Sep 22, 2018 10:12 pm

installed a Idatastart HC1 unit in a 2011 GMC sierra and am using RSAGM10 firmware. All programming completes but cannot get unit to remote start. Door locks work fine. When I try to start I get 4 flashes and vehicle does not even try to crank. According to error code chart is says engine is running but engine is not running. I went over all of my connections and all seem to be fine. Any help is appreciated!

User avatar
Murph
Site Admin
Posts: 7234
Joined: Sun Oct 23, 2011 8:35 pm

Re: 2011 GMC Sierra will not remote start

Post by Murph » Sun Sep 23, 2018 10:49 pm

You need to hold the start button down for 2.5 seconds. Pressing it once gives you a query and the lights flash 4 times.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

Post Reply

Return to “Fiat”