18 Jeep Wrangler JL CANH / CANL Location

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
uh60l
New User
Posts: 3
Joined: Mon Sep 17, 2018 2:18 pm

18 Jeep Wrangler JL CANH / CANL Location

Post by uh60l » Mon Sep 17, 2018 2:24 pm

Hi all, Doing an install in a 2018 Jeep Wrangler JL.. the docs say that the CANH / CANL wires are behind the glove box and are yellow brown and yellow.. Does anyone know if this is in the green block of wires or white block ?? The green block has several yellow wires and the white block does not seem to have anything that matches.. I am just trying to narrow it down.

Thanks in advance for the help.

User avatar
Dara DeGrand
ADS Team
Posts: 5215
Joined: Mon Dec 02, 2013 1:34 pm

Re: 18 Jeep Wrangler JL CANH / CANL Location

Post by Dara DeGrand » Mon Sep 17, 2018 2:52 pm

You should be connecting to the green block, with the white plugs on it. There should be several 2-pin connectors there. You can connect to any of them. If you have a plug with a yellow wire, the yellow is always your Can Low (yellow/brown goes to this). The other wire will be your Can High.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

uh60l
New User
Posts: 3
Joined: Mon Sep 17, 2018 2:18 pm

Re: 18 Jeep Wrangler JL CANH / CANL Location

Post by uh60l » Mon Sep 17, 2018 3:03 pm

Thanks !!

Post Reply

Return to “Dodge, Chrysler, Jeep”