No DTC on 11 Ridgeline

[meadland]

Hi
I just installed the Maestro RR into my 11 Honda Ridgeline with Kenwood DDX9704s reciever.
The steering wheel buttons work great and also the gauges work. The problem is I dont get the DTC
info. The Idata website has DTC check/reset listed as a function with this setup .
I assume the data from the Brown/yellow Brown/Red wires is good or I wouldn't have gauges.
The Maestro software is ADS-RR(SI)-HON01-DS VERSION 2.80
Kenwood system versin 1.0.0328.1400 application ver. 1.8.0008.1600.
Any help or ideas appreciated.
Thanks

[Dara DeGrand]

It's a firmware issue, we will update and fix it. I will let you know as soon as it is up.

[Dara DeGrand]

I have sent a test firmware to your account that should fix this issue. To get it: Login, hit 'flash your module', then choose the 'flash by user firmware' tab. There will be a firmware there called "ADS-RR(SI)-HON01-DS CEL Fix v1 2.7". Select it, proceed with your flash, and let us know how it works out for you.

Thanks,

[Karlg100]

How was the RR install /w harness? Did you use the H02 harness?

[Dara DeGrand]

The Ridgeline is not supported with the HO2 harness. The module is supposed to be hardwired to the truck in this solution.

[Karlg100]

Is there an install guide I can take a look at? Thinking about trying an RR /w new sony head unit. Gauges, TPMS, etc. would be fantastic.

[Dara DeGrand]

http://images.idatalink.com/corporate/C ... 180605.pdf

TPMS is not supported in this firmware; it does steering wheel controls, gauges, and check engine light read/reset.