I need help with Park Assist

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
nicneo
New User
Posts: 3
Joined: Sat Jun 02, 2018 8:26 am

I need help with Park Assist

Post by nicneo » Sat Jun 02, 2018 9:25 am

I have a 2018 Toyota 4Runner, Installed the Alpine ILX-F309 with HRN-RR-TO2. according to the idata-link maestro firmware, park assist is supported by all hardware, however, I can't get it to show up. Could there be something I'm missing?

Thanks for your help.

User avatar
Dara DeGrand
ADS Team
Posts: 5221
Joined: Mon Dec 02, 2013 1:34 pm

Re: I need help with Park Assist

Post by Dara DeGrand » Mon Jun 04, 2018 8:52 am

If the parking assist is not on the data lines that run behind the radio, the maestro is unable to detect it and show the parking assist information. At that point, the parking assist is likely analog, independent of the radio, and just plays the parking chime through the gauge cluster.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

nicneo
New User
Posts: 3
Joined: Sat Jun 02, 2018 8:26 am

Re: I need help with Park Assist

Post by nicneo » Fri Jun 22, 2018 1:53 pm

Thank you for your response.

yylai
New User
Posts: 3
Joined: Fri Nov 30, 2018 11:32 am

Re: I need help with Park Assist

Post by yylai » Fri Nov 30, 2018 12:02 pm

Hello Dara
I use Maestro RR + W4400NEX on my prius 2016 with IPA
but the parking assist information page in W4400NEX do not show the sonic sensor detect result
just the blank even I park just in front of the wall or other car
is Pioneer W4400NEX does not support toyota ipa system ?

thanks
Dara DeGrand wrote:
Mon Jun 04, 2018 8:52 am
If the parking assist is not on the data lines that run behind the radio, the maestro is unable to detect it and show the parking assist information. At that point, the parking assist is likely analog, independent of the radio, and just plays the parking chime through the gauge cluster.

User avatar
Dara DeGrand
ADS Team
Posts: 5221
Joined: Mon Dec 02, 2013 1:34 pm

Re: I need help with Park Assist

Post by Dara DeGrand » Mon Dec 03, 2018 9:49 am

As our website fit guide shows, parking assist display is not supported on that vehicle. I believe it is on a completely separate data line from where we are operating, which is why we aren't able to show it.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Toyota”