2015 Lexus RX350 - HC3

Available in Canada and USA
Post Reply
IAS
12Volt Specialist
Posts: 2
Joined: Sat Nov 12, 2016 5:23 am

2015 Lexus RX350 - HC3

Post by IAS » Mon Nov 14, 2016 3:35 pm

Hi

I've installed an HC3 system on a 2015 Lexus RX350. The module worked fine for about a few hours then reverted to saying door open when trying to remote start. Prior to this happening the remotes wouldn't read the 2wx programming. Checked the antenna only to find the two of the wires on the molex were not in or crimped to the molex pins. I fixed wires then the remotes were working correctly. but still had the open door issue.

So I tried resetting the module to reprogram and it won't program. I tried re-flashing and still same issue. I've checked all the connections and everything is receiving and sending voltage/signal to the module. But no luck.
When I plug the harnesses into the module, it blinks green twice then done. from there I try to reprogram and nothing happens.

Please advise what could be the issue. The error now is not able to see tach. but I know because it didn't program. but whats odd is the module will control keless entry and the trunk.

Thanks,
Innovative Auto Systems LLC
PO Box 17962
Honolulu Hawaii 96817
808-265-1358

Sean Odani

User avatar
Murph
Site Admin
Posts: 6507
Joined: Sun Oct 23, 2011 8:35 pm

Re: 2015 Lexus RX350 - HC3

Post by Murph » Mon Nov 14, 2016 3:58 pm

You need to call tech support.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

IAS
12Volt Specialist
Posts: 2
Joined: Sat Nov 12, 2016 5:23 am

Re: 2015 Lexus RX350 - HC3

Post by IAS » Mon Nov 14, 2016 4:09 pm

will do.

Thanks,
Sean
Innovative Auto Systems LLC
PO Box 17962
Honolulu Hawaii 96817
808-265-1358

Sean Odani

Post Reply

Return to “iDatastart HCx”