2016 Nissan Rogue PTS

Available in Canada and USA
Post Reply
irelectronics
12Volt Specialist
Posts: 41
Joined: Sat Nov 21, 2015 1:39 pm
Location: Grunthal, Manitoba, Canada
Contact:

2016 Nissan Rogue PTS

Post by irelectronics » Wed Nov 02, 2016 6:17 pm

Hey just wondering default park lights are set to slowly pulse. Is there a reason for that? would it cause problems if I set to constant ON?
Isaak Doerksen
Phone: 204-355-8464
IR Electronics
27061 PR216
Grunthal, MB
R0A0R0
Canada

User avatar
Murph
Site Admin
Posts: 6505
Joined: Sun Oct 23, 2011 8:35 pm

Re: 2016 Nissan Rogue PTS

Post by Murph » Wed Nov 02, 2016 9:35 pm

It's not parking lights. It's hazards. You can't use the negative parking lights in this car.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

irelectronics
12Volt Specialist
Posts: 41
Joined: Sat Nov 21, 2015 1:39 pm
Location: Grunthal, Manitoba, Canada
Contact:

Re: 2016 Nissan Rogue PTS

Post by irelectronics » Wed Nov 02, 2016 9:51 pm

Ok. Ill have to figure something out then. Customer does not like that. :(
Isaak Doerksen
Phone: 204-355-8464
IR Electronics
27061 PR216
Grunthal, MB
R0A0R0
Canada

User avatar
Murph
Site Admin
Posts: 6505
Joined: Sun Oct 23, 2011 8:35 pm

Re: 2016 Nissan Rogue PTS

Post by Murph » Thu Nov 03, 2016 8:57 am

You can use positive but you have to diode isolate each wire.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

Post Reply

Return to “iDatastart HC2”