2016 corolla HC2 crank but no start

Available in Canada and USA
Post Reply
taycam
12Volt Specialist
Posts: 8
Joined: Fri Jun 27, 2014 2:16 pm

2016 corolla HC2 crank but no start

Post by taycam » Wed May 04, 2016 10:37 am

HC2 ...3rd one now that will crank and not start occasionally...led's turn red upon ignition when no start but green when car will start

have switched to idatalink and premier defence remotes and no issues with any with that setup

any ideas?
Al Burton
James Toyota
1234 Riverside Drive Timmins Ontario P4R 1A4
705 267 7188

User avatar
Murph
Site Admin
Posts: 6546
Joined: Sun Oct 23, 2011 8:35 pm

Re: 2016 corolla HC2 crank but no start

Post by Murph » Wed May 04, 2016 10:47 am

It should turn red at crank. That is normal behavior. When it fails to stay running, what do the parking lights do? You should get an error?
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

taycam
12Volt Specialist
Posts: 8
Joined: Fri Jun 27, 2014 2:16 pm

Re: 2016 corolla HC2 crank but no start

Post by taycam » Wed May 04, 2016 10:55 am

parking lights don't do anything....car will just crank, the odd time it will start and stall or start and stay running.... but when I place H key next to tumbler the car will start and run
Al Burton
James Toyota
1234 Riverside Drive Timmins Ontario P4R 1A4
705 267 7188

taycam
12Volt Specialist
Posts: 8
Joined: Fri Jun 27, 2014 2:16 pm

Re: 2016 corolla HC2 crank but no start

Post by taycam » Wed May 04, 2016 11:07 am

reflashed and relearned and this one just started working normally
Al Burton
James Toyota
1234 Riverside Drive Timmins Ontario P4R 1A4
705 267 7188

User avatar
Murph
Site Admin
Posts: 6546
Joined: Sun Oct 23, 2011 8:35 pm

Re: 2016 corolla HC2 crank but no start

Post by Murph » Wed May 04, 2016 11:50 am

Very strange
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com

Post Reply

Return to “iDatastart HC2”