Flashing Procedure for iDatalink Maestro RR Interface Module

Find answers to common installation issues with the WebLink Updater.
Post Reply
dangerruss
New User
Posts: 2
Joined: Wed Jan 06, 2021 5:10 pm

Flashing Procedure for iDatalink Maestro RR Interface Module

Post by dangerruss »

I will be installing a Pioneer DMH-W4660NEX in a 2012 Jeep JKU Rubicon. Can I flash/program my new iDatalink Maestro RR Interface Module without being installed in my vehicle? I started the process and seemed like the installation was asking me to press the buttons on my steering wheel. I may have misunderstood the process. Please help. Thanks in advance,,,

User avatar
Dara DeGrand
ADS Team
Posts: 7188
Joined: Mon Dec 02, 2013 1:34 pm

Re: Flashing Procedure for iDatalink Maestro RR Interface Module

Post by Dara DeGrand »

Flash the maestro, then install in the vehicle. It will ask you to confirm what your steering wheel looks like when you're flashing, but that's about as complicated as it gets. Any questions, just give our tech support line a shout.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

dangerruss
New User
Posts: 2
Joined: Wed Jan 06, 2021 5:10 pm

Re: Flashing Procedure for iDatalink Maestro RR Interface Module

Post by dangerruss »

Thanks...

Post Reply

Return to “Weblink Updater”