2016/17 Mustang With Shaker Sync 3

Group using the aFO2 firmware for vehicle equipped with Sony audio * see specific firmware for full feature list.
Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

Ok, tried again. I select 2017, Ford, mustang, 8” radio, the. My only possible next option for “brands” is audison. It gives me no universal selection option. Any thoughts?

Thanks,
Jb

billr
ADS Team
Posts: 676
Joined: Mon Feb 05, 2018 9:18 am

Re: 2016/17 Mustang With Shaker Sync 3

Post by billr »

to make the AR go into universal mode select the year then under Model select "Other".

Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

OK, back again. got the Audison ap8.9bit, but now the connection from the T harness doesn't plug into the amplifier. It has 2 pins too many. I have an input harness for the audison to go into the input but I do not know the pinout coming out of the T harness. Can anyone please help.

What can I do here? The instructions say that Audison is supposed to supply some connector. I cannot find it and if I do it will take another 3 weeks to get from Poland.

This is honestly getting pretty frustrating. What can we do?

User avatar
Dara DeGrand
ADS Team
Posts: 6968
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Dara DeGrand »

Yes; There is an additional cable called the HRN-AR-AUD that is required to work with Audison amps. I don't have one, otherwise I would send to you. There are quite a few dealers here in the US that sell Audison and should be able to order that harness from their distributors; if it were me, that would be my next step in tracking one down before ordering one internationally.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

It’s not the Ads-mar-aud??

User avatar
Dara DeGrand
ADS Team
Posts: 6968
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Dara DeGrand »

Yes, same thing.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

Thx, there are very few out there. Not sure I can get one, I’ve ordered one, but no confirmation yet.

Can you send me a wiring diagram in case I can’t find out.

Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

ok, I've got all of my connections and im hooked up. I've updated everything on both the audison and the maestro and im only getting sound out of the front left channel.

The maestro is blinking 2 red light slowly

any thoughts?

Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

ok, I've got all of my connections and im hooked up. The maestro blinking 2 red lights slowly, like some kind of error. I have no rear channels out. The right side didn't work but then I jiggled the harness and now ive got both sides on the front

any thoughts?

Jbgt350
New User
Posts: 17
Joined: Fri May 17, 2019 11:52 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Jbgt350 »

Got it. Wrong update for the Amp. Thanks for the help!

Cathul
New User
Posts: 42
Joined: Sat Mar 30, 2019 9:55 am
Location: Germany

Re: 2016/17 Mustang With Shaker Sync 3

Post by Cathul »

According to Kenwood the XR600-6DSP has 6 channels of input. 4 channels for audio, 2 channels for information signal.
https://www.kenwood.com/usa/car/excelon ... /spec.html
I wonder why the AR is not utilizing the input channels on the amp then?

User avatar
Dara DeGrand
ADS Team
Posts: 6968
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by Dara DeGrand »

Cathul wrote:
Wed Jun 26, 2019 4:38 am
According to Kenwood the XR600-6DSP has 6 channels of input. 4 channels for audio, 2 channels for information signal.
https://www.kenwood.com/usa/car/excelon ... /spec.html
I wonder why the AR is not utilizing the input channels on the amp then?
This is not correct. Trust me, we want as much coverage as possible for all cars; we'd use the inputs if we could. It is 2 channels of input, 6 channel output.

With this car, the OEM radio outputs 4 channels of mixed music and chimes/information, so it is much different than the vast majority of digital OEM amplified vehicles currently out there.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Cathul
New User
Posts: 42
Joined: Sat Mar 30, 2019 9:55 am
Location: Germany

Re: 2016/17 Mustang With Shaker Sync 3

Post by Cathul »

Damn... except you... who else can you trust these days then? :(
Thnx for the heads up... guess i stay with the DSR1 then. ;)

x0ayham0x
New User
Posts: 7
Joined: Sun Oct 20, 2019 8:17 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by x0ayham0x »

Can someone please recommend which Audison amp to get?
I have a 2016 Mustang with 9 speakers.
Would the AP4.9 be good?

x0ayham0x
New User
Posts: 7
Joined: Sun Oct 20, 2019 8:17 pm

Re: 2016/17 Mustang With Shaker Sync 3

Post by x0ayham0x »

Jbgt350 wrote:
Tue Jun 04, 2019 9:58 am
It’s not the Ads-mar-aud??
Do you have a pic of this cable please?
I just ordered an Audison AP8.9

Post Reply

Return to “Ford”