Dodge Challenger 2016

Group using the aCH2 and aCH3 firmwares for vehicle with premium audio * see specific firmware for full feature list.
Post Reply
car-tronic
New User
Posts: 3
Joined: Thu Jan 23, 2020 3:28 am

Dodge Challenger 2016

Post by car-tronic »

Hello

He contacts you from Poland. Our friend asked us a question. Dodge Challenger 2016 wants to replace the factory aftermarket amplifier. Searching for information, I came across this forum.
Will MAESTRO AR and aCH2 products enable us to replace the amplifier? On speaker grilles like the ALPINE inscription.

Thank you for the information.
Image


The same situation applies to the replacement of the amplifier on the Chevrolet Camaro 2017. We do not see products for this model.
Image

billr
ADS Team
Posts: 689
Joined: Mon Feb 05, 2018 9:18 am

Re: Dodge Challenger 2016

Post by billr »

Our interfaces are designed to work with vehicles made for North America so there is no guarantee it will work over there. You could always try it however there would be support from us if it doesn't work.
As for the Camaro, we do not have a solution for that one yet.

car-tronic
New User
Posts: 3
Joined: Thu Jan 23, 2020 3:28 am

Re: Dodge Challenger 2016

Post by car-tronic »

Hello

Thank you for the information Dodge Challenger 2016 is imported from North America. We have pictures of sockets, we cannot add them.
Please confirm whether MAESTRO AR and aCH2 products are suitable.

billr
ADS Team
Posts: 689
Joined: Mon Feb 05, 2018 9:18 am

Re: Dodge Challenger 2016

Post by billr »

If the car is from North America then the AR and aCH2 will work.

car-tronic
New User
Posts: 3
Joined: Thu Jan 23, 2020 3:28 am

Re: Dodge Challenger 2016

Post by car-tronic »

Thank you for the information.

Post Reply

Return to “Chrysler, Dodge, Jeep”