Page 1 of 1

Pioneer W8400NEX questions

Posted: Sun Nov 11, 2018 9:53 pm
by youdrinkindunkin
Hello,

Purchased a W8400NEX and CH1 to put in my 2014 Rubicon with factory Alpine, curious if there is a wiring diagram that will be published ? I checked on the website and only found the generic install guide not the detailed wiring diagram. Also I'd rather not run a new GPS antenna and see the NAV2 adapter will convert my factory navigation antenna to the aftermarket radio...is there any reason to use the Pioneer one or is the factory one ok ?

Thanks !

- Bobby

Re: Pioneer W8400NEX questions

Posted: Mon Nov 12, 2018 8:09 am
by Dara DeGrand
Install guide:
http://images.idatalink.com/corporate/C ... 180605.pdf

The NAV2 is listed to work for your vehicle, so you could use that instead of running a new one, if you'd like.

Re: Pioneer W8400NEX questions

Posted: Sun Nov 18, 2018 3:21 pm
by youdrinkindunkin
Sadly it didn't work, I reseated the adapter multiple times but I just get the error in the picture.

"GPS antenna problem detected. Contact dealer or service center"

I connected the antenna in the Pioneer box and it worked perfect.

On a side note, I connected a micro bypass by the video still won't play while moving...any idea if these models not compatible ?

Thanks again

Image

Re: Pioneer W8400NEX questions

Posted: Mon Nov 19, 2018 9:39 am
by Dara DeGrand
I believe the new radios aren't able to be bypassed; they disable video as soon as the GPS sees that you're moving.