2014 tahoe, kenwood dnr476s no sound at all

Post Reply
14tahoe
New User
Posts: 2
Joined: Sat Jul 13, 2019 11:58 pm

2014 tahoe, kenwood dnr476s no sound at all

Post by 14tahoe »

Ready harness, gm5 firmware
I have everything plugged in, checked checked and rechecked but can not get sound from my bose/nav tahoe.
The harness has the filters in place and all the wires appear to be connected correctly.

If I unplug just the main radio harness and plug the factory radio in I got static as soon as it powered up, which I expected since no antenna.

build tag says uys and uqa w/o y91. bluetooth, bose, factory nav

User avatar
Dara DeGrand
ADS Team
Posts: 6859
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2014 tahoe, kenwood dnr476s no sound at all

Post by Dara DeGrand »

On the t-harness, there is a blue/white wire. Do you have this connected to the Kenwood's blue/white?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

14tahoe
New User
Posts: 2
Joined: Sat Jul 13, 2019 11:58 pm

Re: 2014 tahoe, kenwood dnr476s no sound at all

Post by 14tahoe »

I have since fixed it. The problem was with the flash. I used the desktop version and had no sound, used the web based one and it worked straight away.

User avatar
Dara DeGrand
ADS Team
Posts: 6859
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2014 tahoe, kenwood dnr476s no sound at all

Post by Dara DeGrand »

Good deal, and sorry about that- the IT team has found and fixed the issue with desktop.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “GM5+ radio replacement solution”