So if I hook my iPhone up to a cm900 module I can see the starter module but I can’t configure anything it just gives me an error. I can flash the blade no problem. Any ideas as to why ? I can go through and program the starter fine with my OP500. I’ve tried a few different CM900s
Thanks Joe
CM900 flash using ADS-WLM-AP1
-
- 12Volt Specialist
- Posts: 39
- Joined: Thu Nov 21, 2013 2:47 pm
- Location: Dracut Ma
- Contact:
CM900 flash using ADS-WLM-AP1
Joseph Fournier Jr
Lowell Ma 01851
Gervais Imports Inc.
6 Industrial Ave
978-866-5653
Lowell Ma 01851
Gervais Imports Inc.
6 Industrial Ave
978-866-5653
- Murph
- Site Admin
- Posts: 6866
- Joined: Sun Oct 23, 2011 8:35 pm
Re: CM900 flash using ADS-WLM-AP1
It's a glitch on the 900s. You need to use a PC to make changes.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.
1-866-427-2999
support@idatalink.com
-
- 12Volt Specialist
- Posts: 39
- Joined: Thu Nov 21, 2013 2:47 pm
- Location: Dracut Ma
- Contact:
Re: CM900 flash using ADS-WLM-AP1
Ok thanks Murph
Joseph Fournier Jr
Lowell Ma 01851
Gervais Imports Inc.
6 Industrial Ave
978-866-5653
Lowell Ma 01851
Gervais Imports Inc.
6 Industrial Ave
978-866-5653