2010 Fusion SE Questions

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
New User
Posts: 1
Joined: Fri Oct 25, 2019 4:50 pm

2010 Fusion SE Questions

Post by MattCritt »

I just purchased a 2010 Fusion w/o Nav with sync. I am looking to add an aftermarket radio that has Apple Play and Android Auto, looking a the Kenwood DMX706S.

1. To retain the OE satellite radio, do i still need to buy an aftermarket tuner, or do i retain the OE tuner?

2. The display located above the radio that stays, i have seen videos where information is displayed there. Is this done through the RR?


User avatar
Dara DeGrand
ADS Team
Posts: 6968
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2010 Fusion SE Questions

Post by Dara DeGrand »

1. The OEM tuner is built into the radio, so it cannot be retained. You will need an aftermarket tuner. You can keep the OEM satellite antenna by using our SAT1. It plugs into the new tuner and into the existing antenna and makes the installation of the tuner super easy.

2. Yes. The Kenwood radio you're putting in will send information out, and the maestro allows it to show on the upper display.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”