Hi,
I recently bought a used 2018 wrangler JK that had the alpine ILX-w650. I opened the dash and found a maestro connected, but there was no working steering wheel controls and very little of the radio touch screen applications work. I know it wasn't connected properly, and I believe some of the cables are missing. it does have the harness package to the factory connections. Is there a video to support maestro install in my alpine head unit? Thanks for any help.
Alpine ILX-650 with maestro rr
-
- Moderator
- Posts: 322
- Joined: Mon Oct 07, 2019 12:49 pm
Re: Alpine ILX-650 with maestro rr
We don't have a video specific to this car and/or radio combination. However, the install guide does show what is required for it to work. If you have the serial number of the RR, I could confirm the programming to the vehicle is done properly for you.
Here's a link to the guide for your application. The vehicles are bookmarked and AT vs MT on the Wrangler is just designating auto transmission vs manual.
https://images.idatalink.com/corporate/ ... 191017.pdf
Thanks!
Here's a link to the guide for your application. The vehicles are bookmarked and AT vs MT on the Wrangler is just designating auto transmission vs manual.
https://images.idatalink.com/corporate/ ... 191017.pdf
Thanks!
Chris LaRoche
Automotive Data Solutions
Technical Support - Maestro
MECP Master Installer
Automotive Data Solutions
Technical Support - Maestro
MECP Master Installer