9 red flashes

Find answers to common installation issues with the WebLink Updater.
New User
Posts: 3
Joined: Mon Oct 27, 2014 12:56 pm

9 red flashes

Post by Bkfrawley »

Installed a HCX remote starter on a 2013 Forester. When I reached second stage of programming I got 9 flashes repeatedly. Went through everything with tech line and still 9 flashes. He said there must be too much solder and it does not sense the wire cut for automatic. Thus 9 flashes it thinks its a standard. Tested for continuity and none was found. Put in a second HCX everything is fine. I was wondering if there is any other answer. Clearly my wiring was good since the second brain worked great the first try. Just wondering if I should try it in another vehicle or send it back?

User avatar
Site Admin
Posts: 6896
Joined: Sun Oct 23, 2011 8:35 pm

Re: 9 red flashes

Post by Murph »

We do not answer questions in this area. If you are a dealer, please request access to the dealer support section.
Brian Murphy
MECP Advanced Certified Installer
ADS Tech Support
Automotive Data Solutions inc.
8400, Bougainville, Montreal, QC.


Return to “Weblink Updater”